Number of Items found: 20

Hammond AO-28 Pre-Amp Restoration System

The Trek II (R) CPR-28 is a premium product designed to provide technicians with the means to restore like-new operation to aging AO-28 pre-amps. These pre-amps were used in classic Hammond(R) A-100, B-3, C-3, D-100 and RT-3 organs. The CPR-28 replaces every resistor and fixed capacitor in the pre-amp including the two multi-section can capacitors. While not every tonewheel organ may warrant this level of restoration, the CPR-28 is provided for those organs requiring the very highest level of quality and reliability in the AO-28.

For additional information visit Trek's web site. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney CPR-28 Hammond AO-28 Pre-Amp Restoration System Stocked 2.0 $448.00 $403.00

Trek II Blank Left End Block

Replaces the end blocks used on the upper or lower manual of standard Hammond consoles. Allows simple mounting of custom switches or controls in a location easily accessible to the organist. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney BE-1A Trek II Blank Left End Block Special Order 0.8 $53.00 $48.00

Trek II Blank Right End Block

Replaces the end blocks used on the upper or lower manual of standard Hammond consoles. Allows simple mounting of custom switches or controls in a location easily accessible to the organist.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BE-2A Trek II Blank Right End Block Special Order 1.0 $39.00 $35.00

Trek II Case Scratch Protectors

These thin fiberglass sheets are shaped to fit between the keyboards and case of standard Hammond consoles to prevent woodwork damage when raising or removing manuals. Made from durable 1/32" G-10 fiberglass with rounded corners. Click for another view. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney CSP-1 Trek II Case Scratch Protectors Stocked 2.0 $43.00 $39.00

Trek II Echo/Tremolo Switch

Provides all the features of the TS-2 with the addition of a three position ECHO / ENSEMBLE / MAIN switch compatible with 4H echo kit tone cabinet switching. PLEASE NOTE: The ETS-2 does not contain the echo kit circuitry and is not compatible with un-balanced (single ended) input Leslie models.

Mounts in place of the lower left hand end block on standard Hammond consoles. Allows convenient rocker switch control of the tremolo and main/ensemble/echo functions. Normally provided with a two position choral/tremolo switch. Also available with a three position switch for use with Leslies designed with a stop function. Two electrically isolated switch sections allow easy control of dissimilar Leslies with a single switch. Pre-punched mounting hole provided for addition of a reverb or other control in the same enclosure. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney ETS-2 Trek II Echo/Tremolo Switch Special Order 0.2 $133.00 $120.00

Trek II Generator Note Replacement

A cost effective alternative to removing and disassembling Hammond tone wheel generators when defective frequencies are encountered. Simple three wire installation. Generates a sine wave output of any tone wheel frequency. The GNR-1 has a built in power supply and will replace one frequency. Each GNR-2 will replace a single additional frequency, but has no power supply, relying on that of the GNR-1. As many as three GNR-2 units may be powered by a single GNR-1. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney GNR-1A Trek II Generator Note Replacement Stocked 2.0 $171.00 $153.00

Trek II Generator Note Replacement

A cost effective alternative to removing and disassembling Hammond tone wheel generators when defective frequencies are encountered. Simple three wire installation. Generates a sine wave output of any tone wheel frequency. The GNR-1 has a built in power supply and will replace one frequency. Each GNR-2 will replace a single additional frequency, but has no power supply, relying on that of the GNR-1. As many as three GNR-2 units may be powered by a single GNR-1. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney GNR-2A Trek II Generator Note Replacement Special Order 2.0 $102.00 $92.00

Trek II Upstop Felt

The KBF-1 is an exact reproduction of the #042-022369 B-3 type upstop felt. An essential part of any Hammond console restoration, it helps restore the "new feel" and quiet operation to the keyboard. One required per manual. Easily installed on late A-100, B-3, C-3, D-100, and RT-3 organs. (These organs are identified by front strips that are secured with Phillips head screws). Also usable on earlier consoles. However, front strip removal on these organs requires substantial keyboard disassembly. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney KBF-1 Trek II Upstop Felt Stocked 0.2 $9.00 $8.00

Trek II Downstop Felt

The KBF-2 is an exact reproduction of the #042-001701 B-3 type downstop felt. An essential part of any Hammond console restoration, it helps restore the "new feel" and quiet operation to the keyboard. One required per manual. Easily installed on late A-100, B-3, C-3, D-100, and RT-3 organs. (These organs are identified by front strips that are secured with Phillips head screws.) Also usable on earlier consoles. However, front strip removal on these organs requires substantial keyboard disassembly. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney KBF-2 Trek II Downstop Felt Stocked 0.2 $14.00 $13.00

Trek II Music Rack Base Mounting Screws

Exact replacement for the #999-006009 brown oval head mounting screws used to secure the music rack mounting base in standard tonewheel consoles. Replaces missing or damaged originals. Set of 4.

Item Description Status Ship Weight List Price Your Price Quantity Gurney MRB-MTG Trek II Music Rack Base Mounting Screws Stocked 0.1 $5.00 $4.50

Trek II Effects Loop

The ELB-1A adds an INSTRUMENT LEVEL effects loop to allow the use of effects devices on either the upper or lower manual of many Hammond organ console and spinet models. The ELB-1A contains an active buffer circuit which prevents the effects device from loading down the organ signal. Two ELB-1A units can be used to provide an effects loop on each manual.

NOTE: Not for use with BV/CV and older model Hammonds. A special version is required for M-100, M-3 and M-2 organs.. Please note in the order form comment box if this is the case so we supply the correct version. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney ELB-1A Trek II Effects Loop Stocked 1.0 $113.00 $102.00

Trek II Line Out Box

The OBL-2 allows standard Hammond consoles to be connected via a 1/4" output jack to an external amplification system. The box is made from heavy gauge anodized aluminum and easily mounts under the generator shelf or other convenient location. The unit has both an overall output and one that is low pass filtered. The low pass output is useful when using a bass amp to reinforce the organ low end. A level control is provided to allow the output signal to be adjusted to match the amplifier input requirements. Also works with spinet organs by connecting to the speaker terminals.

A special version is available for Hammond models with a separate reverb amplifier and speaker (A-100 and M-100) which allow the reverb signal to run through the OBL-2. Contact us for details. MAP

Item Description Status Ship Weight List Price Your Price Quantity Gurney OBL-2 Trek II Line Out Box Stocked 0.9 $80.00 $72.00

Now viewing: 1 - 12 of 20 items
1   2   Next