Tonewheel General Hospital
View Shopping Gurney - VIEW GURNEY | CHECKOUT
Fast, Friendly, Amusing!
Fast, Friendly, Efficient!
Fast, Friendly, Obsessed!
Fast, Friendly, Psychic!
Fast, Friendly, Insightful!
Fast, Friendly, Conscientious!
Fast, Friendly, Knowledgeable!
Fast, Friendly, Accomodating!
Fast, Friendly, Kindhearted!
Fast, Friendly, Good-Natured!
Fast, Friendly, Reliable!
Fast, Friendly, Thoughtful!
Fast, Friendly, Amenable!
Fast, Friendly, Philosophical!
Fast, Friendly, Scintillating!
Fast, Friendly, Inspiring!
Fast, Friendly, Eccentric!
Search for in the

Subscribe to Our
Email Newsletter.

Email address:
Hammond Organ Parts : Kits

Number of Items found: 18

TWG B+ Supply
High voltage DC power is required for early model pre-B2/C2/RT/2 organs to power their internal preamp. The organ received this power from the Hammond tone cabinet, virtually requiring the customer to use the Hammond speaker Leslie configured the 122 family of speakers to provide this voltage. If you have a Leslie other than one from the 122 family you need a way to supply power to the preamp.
This unit will send the proper amount of power 200 volts DC to the preamp and free you from having to connect the tone cabinet to the organ. Unit is pre-wired and easy to install; requires no soldering. Simply attach the AC power input spade terminals to the AC screw terminals on the preamp, then attach the B+ and ground wires to the preamp B+ and GND screw terminals. Unplug the tone cabinet forever! IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
BPLUSTWG B+ SupplyStocked2.5$102.00$102.00

Tone Generator Capacitor Kit
Restores proper generator filtering to tones 49 through 91 to reduce rumble, noise and crosstalk. Includes installation instructions.
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
GENCAPTone Generator Capacitor KitStocked0.2$50.00$50.00

Tone Generator RC Network Kit
Used in conjuction with part number GENCAP. Adds generator filtering to tones 37 through 48 to reduce rumble and noise. Includes Hammond Technical Service Bulletin #16 detailing installation.
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
RCNETTone Generator RC Network KitStocked0.2$20.00$20.00

TWG AO-10 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your Hammond, it may be aging power supply filter capacitors in the preamplifier. This kit will replace all the electrolytic capacitors in AO-10 preamps found in B-2, C-2 and RT-2 organs. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-10CAPTWG AO-10 Electrolytic Capacitor KitStocked0.3$60.00$60.00

TWG AO-28 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your Hammond, it may be aging power supply filter capacitors in the preamplifier. This kit will replace all the electrolytic capacitors in AO-28 preamps found in B-3, C-3, A-100 series, D-100 series, and RT-3 organs. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-28CAPTWG AO-28 Electrolytic Capacitor KitStocked0.5$85.00$85.00

TWG AO-28 Refresh Kit
This kit replaces several resistors and capacitors in the AO-28 preamps found in B-3, C-3, A-100 series, D-100 series, and RT-3 organs. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-28REFRESHTWG AO-28 Refresh KitStocked0.2$20.00$20.00

TWG AO-29 Electrolytic Capacitor Kit for M-3 Organs
If you have hum, scratching, random pops and static coming from your M-3 Hammond speaker it may be aging power supply filter capacitors in the AO-29 power amplifier.
This electrolytic capacitor kit replaces all the electrolytic capacitors originally installed in the permanent magnet version of the AO-29 amplifier. Requires drilling out and installing rivets on the main filter capacitor. Will also work with the field coil version. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-29CAP-M3TWG AO-29 Electrolytic Capacitor Kit for M-3 OrgansStocked0.5$61.00$61.00

AO-29 Electrolytic Capacitor Kit for M-100 Series Organs
If you have hum, scratching, random pops and static coming from your M-100 series Hammond speaker it may be aging power supply filter capacitors in the AO-29 power amplifier.
This electrolytic capacitor kit replaces all the electrolytic capacitors originally installed in the AO-29 amplifier. Requires drilling out and installing rivets on the main filter capacitor. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-29CAP-M100 AO-29 Electrolytic Capacitor Kit for M-100 Series OrgansStocked0.5$62.00$62.00

TWG AO-35 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your A-100 series Hammond reverb speaker it may be aging power supply filter capacitors in the AO-35 reverb amplifier.
This electrolytic capacitor kit replaces the 40/40/30 can capacitor unit and all axial electrolytic capacitors originally installed. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-35CAPTWG AO-35 Electrolytic Capacitor KitStocked0.5$58.00$58.00

TWG AO-39 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your A-100 series Hammond main speakers it may be aging power supply filter capacitors in the AO-39 power amplifier.
This electrolytic capacitor kit replaces the two 30/30 can capacitor units originally installed and the two cathode bypass capacitors in the power tube bias circuit. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-39CAPTWG AO-39 Electrolytic Capacitor KitStocked0.3$46.00$46.00

TWG AO-43 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your L-100 series Hammond it may be aging power supply filter capacitors in the AO-43 power amplifier.
This electrolytic capacitor kit replaces all the can and axial electrolytic capacitors originally installed. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-43CAPTWG AO-43 Electrolytic Capacitor KitStocked0.5$105.00$105.00

TWG AO-44 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your A-100 series Hammond reverb speaker it may be aging power supply filter capacitors in the AO-44 reverb amplifier.
This electrolytic capacitor kit replaces the 3/30/30/20 can capacitor unit and both axial electrolytic capacitors originally installed. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
AO-44CAPTWG AO-44 Electrolytic Capacitor KitStocked0.5$45.00$38.00

TWG PR/QR-40/PR-20 Electrolytic Capacitor Kit
If you have hum, scratching, random pops and static coming from your PR-40, QR-40 or PR-20 series Hammond Tone Cabinet it may be aging power supply filter capacitors in the AO-32 power supply or the AO-33 amplifier. This electrolytic capacitor kit replaces all the can and axial electrolytic capacitors In both units. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
PR-CAPTWG PR/QR-40/PR-20 Electrolytic Capacitor KitStocked0.5$62.00$62.00

TWG BV/CV/RT Preamplifier Parts Kit
This kit replaces all the resistors and capacitors in the 5 tube AO-16875-1 preamp used in BV/CV/RT organs. Converts early version preamps to Code K specifications. Also includes the two capacitors in the rheostat box. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
xV-KITTWG BV/CV/RT Preamplifier Parts KitStocked0.3$33.00$33.00

TWG Two Tube Preamplifier Parts Kit
This kit replaces all the resistors and capacitors in the 2 tube preamp used in the pre-war Model A/AB/B/BC/C/D/E/G organs. Also includes the two capacitors in the rheostat box. Please specify the organ model and serial number in the order form comment box. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
2TUBE-KITTWG Two Tube Preamplifier Parts KitStocked0.3$35.00$35.00

TWG B-3/C-3 Vibrato Line Parts Kit
This kit replaces all the capacitor and resistors on the late model metal frame vibrato line boxes found in Hammond B-3, C-3, A-100, D-100, and RT-3 models. Not applicable for the earlier silver or black wooden line boxes. To see a metal frame line box look at the item immediately below this one.
Kit consists of twenty capacitors and three resistors. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
VIBLINETWG B-3/C-3 Vibrato Line Parts KitStocked0.1$35.00$35.00

TWG M-series Vibrato Line Parts Kit
This kit replaces all the capacitor and resistors on the metal frame vibrato line boxes found in serial number 92748 and later Hammond M-3 and all M-100 series organs.
Kit consists of seventeen capacitors and three resistors. IMPORTANT NOTICE
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
VIBLINE-MTWG M-series Vibrato Line Parts KitStocked0.1$32.00$32.00

TWG Rebuilt Late M3/M-100 Series Vibrato Line Box
Hammond spinet open frame vibrato line box with original red Mylar capacitors and new resistors. For all M-100 series organs and M-3 organs with serial number 109466 and higher. $40 credit for exchanging with your old unit.
ItemDescriptionStatusShip WeightList PriceYour PriceQuantityGurney
VIBLINE-M-RBTWG Rebuilt Late M3/M-100 Series Vibrato Line BoxStocked2.0$125.00$125.00

Now viewing: 1 - 18 of 18 items

Featured Items...