Number of Items found: 7

Bass Pedal Pusher

Replaces broken or missing bass pedal pushers.

Item Description Status Ship Weight List Price Your Price Quantity Gurney PEDPUSH Bass Pedal Pusher Stocked 0.2 $10.00 $10.00

TWG Bench Bumpers - Pair

After many years the rubber strips on the bass pedals break off and no longer protect the bench or pedals from being scratched when the bench is moved. These are easily replaced and improve the appearance of the pedal board. Each kit includes two rubber strips and six nails. Please specify if a 25 or 32 note pedal board is being upgraded.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BB TWG Bench Bumpers - Pair Stocked 0.2 $5.00 $5.00

Bass Pedal Felt Strip

Restore silent operation to your bass pedals. If you hear a click when you press a bass pedal down it is probably the spring steel strip making direct contact with the metal plunger that keys the pedal tones. With use the felt piece between these two items wears out and a hole the size of the plunger tip is created.

This felt strip is designed to replace both the original full length cloth strip in the very early consoles (Model A, BC, BV, etc.) and the individual felt loops in later units (B-2, B-3, A-100, etc).

Item Description Status Ship Weight List Price Your Price Quantity Gurney BPF Bass Pedal Felt Strip Stocked 0.2 $19.00 $17.00

Pedal Switch Actuator Pin

Pedal tone actuator pin for B-3/C-3/A-100/ RT-3 and earlier models.

Item Description Status Ship Weight List Price Your Price Quantity Gurney PEDSWPIN Pedal Switch Actuator Pin Stocked 0.2 $5.00 $5.00

Experienced Bass Pedal Guide Pin

Pedal guide pin for Hammond organ 25 note bass pedal assemblies. Used to maintain the horizontal position of the pedal during up and down strokes. Press/hammer in style used on later pedal assemblies.

Item Description Status Ship Weight List Price Your Price Quantity Gurney PEDGUIDE Experienced Bass Pedal Guide Pin Stocked 0.2 $2.00 $2.00

Bass Pedal Guide Pin Felt

Felt pad for Hammond organ 25 note bass pedal assemblies. Used to prevent noise from the bass pedal striking the guide pin during up and down strokes. There are 50 of these on a 25 note pedal board, two per pedal. These usually wear as they slide up and down the guide pin, first with a groove, then by splitting in two pieces. Secured in place by staples.

Item Description Status Ship Weight List Price Your Price Quantity Gurney PEDGDFELT Bass Pedal Guide Pin Felt Stocked 0.2 $1.00 $1.00

Bass Pedal Upstop Felt Strips

Restore silent operation to your bass pedals. If you hear a clunk when releasing a pedal it is most likely due to worn or compressed upstop felts. These felt strips are designed to replace the original upstop felts found on all 25 note bass pedal boards.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BPUSF Bass Pedal Upstop Felt Strips Stocked 0.9 $40.00 $40.00

Now viewing: 1 - 7 of 7 items